- WR740N路由2分钟掉一次再链接上
40 INFO 0days, 00:07:54, PPPOE: RX PADO. 39 INFO 0days, 00:07:54, PPPOE: RX PADO. 38 INFO 0days, 00:05:02, PPPOE: RX PADO. 37 INFO 0days, 00:05:02, PPPOE: RX PADO. 36 INFO 0days, 00:03:57, PPPOE: RX PADO. 35 INFO 0days, 00:03:57, PPPOE: RX PADO. 34 INFO 0days, 00:02:58, PPPOE: RX PADO. 33 INFO 0days, 00:02:58, PPPOE: RX PADO. 32 INFO 0days, 00:01:48, PPPOE: RX PADO. 31 INFO 0days, 00:01:48, PPPOE: RX PADO. 30 INFO 0days, 00:00:56, PPPOE: RX PADO. 29 INFO 0days, 00:00:56, PPPOE: RX PADO. 28 INFO 0days, 00:00:19, DHCPS: Send OFFER with ip 192.168.1.102 27 INFO 0days, 00:00:19, DHCPS: Send NAK 26 INFO 0days, 00:00:19, DHCPS:REQUEST ip c0a80165 already reserved by 00:E0:4C:BA:B0:12 25 INFO 0days, 00:00:15, DHCPS: Send OFFER with ip 192.168.1.101 24 INFO 0days, 00:00:14, DHCPS: Send NAK 23 INFO 0days, 00:00:14, DHCPS:REQUEST ip c0a80164 already reserved by someone 22 INFO 0days, 00:00:11, PPP: ppp0 set localIp 74d15d20 dstIp 74d15c01 mtu 1480 21 INFO 0days, 00:00:11, PPP IPCP: RX CONFIGURE_ACK. 20 INFO 0days, 00:00:11, PPP IPCP: TX CONFIGURE_REQUEST. 19 INFO 0days, 00:00:11, PPP IPCP: RX CONFIGURE_NAK. 18 INFO 0days, 00:00:11, PPP IPCP: TX CONFIGURE_ACK. 17 INFO 0days, 00:00:11, PPP IPCP: RX CONFIGURE_REQUEST. 16 INFO 0days, 00:00:11, PPP IPCP: TX CONFIGURE_REQUEST. 15 INFO 0days, 00:00:11, PPP PAP: RX AUTHENTICATION_ACK. 14 INFO 0days, 00:00:11, PPP PAP: TX AUTHENTICATION_REQUEST. 13 INFO 0days, 00:00:11, PPP SM: retry. 12 INFO 0days, 00:00:10, PPP LCP: RX CONFIGURE_ACK. 11 INFO 0days, 00:00:10, PPP LCP: TX CONFIGURE_ACK. 10 INFO 0days, 00:00:10, PPP LCP: RX CONFIGURE_REQUEST. 9 INFO 0days, 00:00:10, PPP LCP: TX CONFIGURE_REQUEST. 8 INFO 0days, 00:00:10, PPPOE: RX PADS. 7 INFO 0days, 00:00:10, PPPOE: TX PADR. 6 INFO 0days, 00:00:10, PPPOE: RX PADO. 5 INFO 0days, 00:00:10, PPPOE: TX PADI. 4 INFO 0days, 00:00:10, try special dail type: 0 3 INFO 0days, 00:00:10, PPP LCP: TX TERMINATION_REQUEST. 2 INFO 0days, 00:00:07, System start ok. 1 INFO 0days, 00:00:04, LAN: mirror0 set ip c0a80101 mask ffffff00 Time = 2006-01-01 8:07:51 478s H-Ver = WR740N 5.0/6.0 00000000 : S-Ver = 5.1.3 Build 130129 Rel.50590n L = 192.168.1.1 : M = 255.255.255.0 W1 = PPPoE : W = 116.209.93.32 : M = 255.255.255.255 : G = 116.209.92.1 Cnt = 8320, Free = 8203, Busy = 117
-
提问者: tmykts | 提问时间: 2014-03-29 19:59:13 | 回复(1)
已解决
-
- 1.尊敬的客户:
您好!
用单机接宽带能正常上网的这一台电脑有线连接路由器的LAN口,宽带进线连接路由器的WAN口,进入路由器的管理界面(默认为192.168.1.1),作如下设置:
1、登陆界面,选择“网络参数”--“WAN口设置”--选择自动连接(默认是按需连接),特殊拨号选择正常选择拨号模式(默认是自动选择拨号模式),保存;
2、在“网络参数”--“MAC地址克隆”页面,点击“克隆MAC地址”按钮,保存重启路由器后测试使用情况。
- 回答者: TP-LINK/普联厂家 2014-04-03 最佳答案
- 1.尊敬的客户: