(Netgear Switch Routing) >telnet 192.168.77.151
Trying 192.168.77.151...
(Netgear Switch Routing)
User:admin
Password:
(Netgear Switch Routing)>en
Password:
(Netgear Switch Routing)#show network
IP Address............................... 192.168.77.151
Subnet Mask.............................. 255.255.255.0
Default Gateway.......................... 192.168.77.127
Burned In MAC Address.................... 00:10:18.82.04:E9
Locally Administered MAC Address......... 00:00:00:00:00:00
MAC Address Type......................... Burned In
Network Configuration Protocol Current... DHCP
Management VLAN ID....................... 1
Web Mode................................. Enable
Java Mode ............................... Disable

(Netgear Switch Routing)#show telnet
Outbound Telnet Login Timeout (minutes)........ 5
Maximum Number of Outbound Telnet Sessions..... 5
Allow New Outbound Telnet Sessions............. Yes

(Netgear Switch Routing) (Config)#lineconfig ?
<cr>        Press Enter to execute the command.
(Netgear Switch Routing) (Config)#lineconfig
(Netgear Switch Routing) (Line)#transport ?
input        Displays the protocols to use to connect to a specific line of the router.
output      Displays the protocols to use for outgoing connections from a line.
(Netgear Switch Routing) (Line)#transport output ?
telnet       Allow or disallow new telnet sessions.
(Netgear Switch Routing) (Line)#transport output telnet ?
<cr>        Press Enter to execute the command.
(Netgear Switch Routing) (Line)#transport output telnet
(Netgear Switch Routing) (Line)#

(Netgear Switch Routing) (Line)#session-limit ?
<0-5>        Configure the maximum number of outbound telnet sessions allowed.
(Netgear Switch Routing) (Line)#session-limit 5
(Netgear Switch Routing) (Line)#session-timeout ?
<1-160>        Enter time in minutes.
(Netgear Switch Routing) (Line)#session-timeout 15